Business
Contract work: where money is lost and how to avoid it
Contract work is not just signing papers, but also monitoring terms, correspondence, acts, deadlines and recovery. We look at the stages where a business loses money and what can be fixed in advance.
You signed a contract, fulfilled your obligations, but the payment never came. Or your partner missed the deadlines, and you are incurring losses. Everything seems to be properly documented, yet the money is being lost — at the approval stage, in correspondence, in incorrectly prepared acts.
Working with contracts is a continuous process: from the first draft to actually receiving the money. The cost of a mistake at each step is different: an unagreed term has to be proven in court, oral agreements cannot be substantiated, and the debt remains on paper without any real recovery.
Contract work: where money is lost
Money in contract work is lost before court — at the stage when terms were not put in writing and performance was not confirmed with documents. Verbal agreements over the phone or in a messenger, a standard template without review, and careless acceptance notes produce one result: there is nothing to recover or nothing to prove your position with. Restoring what was lost later costs more than formalizing the deal upfront.
Gaps arise in three places. During negotiation, the parties understand the deadlines, scope, quality, and payment procedure differently. At signing, the document goes to an employee without authority or is backdated. During performance, no acts, delivery notes, or correspondence about changes remain. What exactly breaks and how it looks on paper:
- Negotiation without recording: a dispute over what was actually promised — and no evidence beyond words.
- Signature without authority: the contract is signed by a person without a power of attorney or with an expired one — the transaction is in question.
- No confirmation of acceptance: the absence of acts makes it difficult to prove the fact and scope of performance.
- Changes made verbally: the terms are in fact already different, but the document still contains the old ones.
The practical conclusion is simple: every agreement must leave a trace — a signed document, an invoice, an act, or a letter. Check who exactly has the right to sign on behalf of the counterparty, and verify the authority against the document, not the job title.
Contract work before signing: terms that are expensive to fix
The most expensive things to fix are liability, deadlines, acceptance procedure and unilateral termination — these four terms determine what you get in a dispute. A clause that provides only a penalty for late payment for the counterparty and says nothing about compensation for losses deprives you of real compensation. Deadlines without a link to an event — "within a reasonable time", "as needed" — cannot later be proven in court.
Drafting a contract should begin with a review: a lawyer checks every wording against the actual procedure of your transaction, not against a template from the internet. Below are typical flaws in a draft and their consequences.
- Liability: only a penalty without losses — losses cannot be recovered
- Deadlines: "reasonable time" instead of a specific date — delay cannot be proven
- Acceptance: silence equated to acceptance — quality objections cannot be raised later
- Unilateral termination: the right belongs to the counterparty, but not to you — the transaction is terminated without your consent
| Term | Dangerous wording | Consequence |
|---|---|---|
| Liability | only a penalty for you | losses cannot be recovered |
| Deadlines | "as needed" | delay cannot be proven |
| Acceptance | deemed accepted without objections | you lose the right to claims |
| Unilateral termination | right only for the counterparty | the transaction is terminated without your consent |
It is more convenient to entrust the review of the draft before signing to a lawyer — it is cheaper than fixing the consequences.
How the approval of amendments works: protocol of disagreements and recording agreements
Approval is an exchange of drafts, not a single letter with amendments. It works like this: you receive the draft, prepare a protocol of disagreements with a line-by-line statement of your version of the disputed clauses, send it to the counterparty and record the date of sending. Then the parties either accept the amendments or give a reasoned refusal — and only after that sign the final text.
The main mistake here is to leave the agreements in correspondence and sign the template "as is". The terms agreed in the messenger did not make it into the text, and in a dispute there is nothing to refer to. The second mistake is handwritten amendments in the contract itself without certification: it is unclear who made them and when. The third is signing without verification: the final version still contains clauses from the first version that you already asked to remove.
- Protocol of disagreements: draw it up as a separate document with references to the contract clauses and your version
- Sending: keep confirmation that the counterparty received your amendments
- Final verification: before signing, check the final text against the agreed version page by page
- Appendices: agree specifications, schedules and act forms together with the body of the contract, not after
A practical guideline: if there is no written response from the counterparty on a disputed clause, consider the term not agreed — and do not sign until the version is recorded on paper.
Drafting a contract for business: where the work begins
Work on a contract begins not with a template, but with reconstructing the actual order of the transaction: who hands over what, within what timeframes, how the result is accepted, and what happens if something goes wrong. A template sets the form but does not answer these questions — they need to be discussed before the first paragraph of text appears. Bonafacto lawyers first study the documents and only then assess the prospects, and in this logic a contract is a continuation of the transaction, not a paper for a tick-box.
Next, five pillars are fixed: the subject matter, the timeframes, the acceptance procedure, liability, and the procedure for amendment and termination. The subject matter is described so that it can be verified in fact, not guessed from its name. Timeframes are tied to events, not to "reasonable" benchmarks. Acceptance is set out with the parties' actions: who signs, at what point, and what counts as an objection. Liability and the procedure for amending terms are the places where a transaction either remains manageable or begins to depend on the partner's goodwill (and this is exactly where a template usually stays silent).
At Bonafacto, the cost of the stage is fixed in the contract before work begins — the same principle of transparency applies in the contract with the counterparty itself: the terms must be clear before signing, not after a dispute.
Checklist before signing:
- Subject matter: described verifiably, without wording like "services as needed"
- Timeframes: tied to an event or date, not to a "reasonable period"
- Acceptance: states who signs and what counts as an objection
- Liability: covers both penalties and losses
- Amendment and termination: clear who can exit the transaction and on what terms
It is more convenient to entrust the review of a draft before signing to a contract lawyer in Almaty — it is cheaper than fixing the consequences.
Negotiating edits: how not to lose agreements along the way
Negotiation is separate work, not an exchange of polite letters: every edit must leave a trace, otherwise the parties arrive at signing with different versions of the text. The practical procedure is simple: one document — one version, edits are made in the file, not in the body of an email, disputed clauses are set out in a protocol of disagreements, and the outcome of the negotiation is recorded in writing. In our practice this is a general assessment: where edits live in correspondence without a single file, a dispute over the content of the terms arises even before performance begins.
What helps avoid losing agreements:
- Versioning: the file has a number and a date, the old revision is not edited "on top"
- Protocol of disagreements: unagreed clauses are listed separately, with each party's wording
- Final reconciliation: before signing, the parties compare the final text line by line
- Storage: the final revision and all intermediate versions remain in one place
A typical mistake is to agree on terms in a messenger and sign a template that does not contain those agreements. The second is to accept a counterparty's edit without rereading the neighbouring clauses: a changed wording of acceptance or liability drags the meaning of the entire section with it. The third is not to record who proposed the disputed wording and when: when a dispute is examined, there will be nothing to reconstruct the course of the negotiation from. It is useful to agree in advance that legally significant messages are sent to the addresses specified in the contract — then correspondence becomes part of the evidence, not just a chat history.
Drafting and Execution of Contracts: Common Business Mistakes
The most costly part is not the text of the contract but its execution: a signature without verification of authority, missing dates and details, agreements "made verbally." A signatory without a power of attorney acts beyond the scope of their authority, and such a document is then difficult to defend in a dispute. An empty date field or incomplete details of the parties create grounds for doubt about the very fact of the transaction.
A separate category is changes agreed upon orally. An addendum without signatures and a protocol of disagreements that was never formalized leave the parties bound by the original version: what was said in negotiations was one thing, what is in the document is another. You can verify who is actually entitled to sign by checking the charter, the appointment decision and the power of attorney — this is the basic set for any transaction.
Typical execution mistakes and their consequences:
- Authority: a signature without verification of the charter, appointment decision and power of attorney
- Details and date: empty fields, incomplete data of the parties
- Addenda: an oral agreement without written formalization
- Protocol of disagreements: comments on the draft not recorded
Which document will confirm that the signatory acted within their authority? The one you checked before signing — proving this after a dispute is far more expensive. At Bonafacto, contract preparation begins with a review of the counterparty's documents, not with a template.
It is more convenient to verify authority and details before signing: correcting the consequences of execution mistakes is always more expensive. Drafting and execution of contracts is work in which every detail matters already at the draft stage.
Drafting a service agreement: what to look at
The main difficulty is the subject matter: a service is described through the contractor's actions rather than through a finished result. That is why preparing such a document begins with describing exactly what the contractor does, in what scope and within what timeframes — otherwise, in a dispute, it is impossible to prove either the fact that the service was rendered or its completeness. The result of a service is not always tangible: consultation, training, and maintenance leave no "goods" that can be inspected and returned.
The second block is acceptance. The agreement records which document confirms performance (an acceptance certificate), who signs it, and what constitutes refusal to sign. If the acceptance procedure is described vaguely, the certificate will not confirm the scope — and it is difficult for the customer to object on quality, and difficult for the contractor to prove that the work was delivered.
Practical advice: describe the result and the acceptance procedure so that the certificate confirms the scope — a list of stages, the contents of the report, the number of consultations — rather than being limited to the phrase "services were rendered in full." When reviewing a draft, Bonafacto lawyers check the wording of the certificate against the actual course of the work: the document should be read together with the agreement, not separately from it.
The third point is recording the course of performance. Correspondence, interim reports, and requests help confirm that the service was rendered and in what scope; without them, the dispute comes down to the parties' words. Check that the draft has a place for such documents and that it is clear who prepares them and when.
- Subject matter: the contractor's actions, scope, and timeframes — without "reasonable" wording
- Acceptance: certificate, signatory, procedure for objections
- Scope: stages, contents of the report, number of actions
- Recording: correspondence and interim documents as evidence
How to review a draft service agreement step by step
It is convenient to conduct the review not by inspiration but along a short route: from the subject matter to acceptance and then to what will remain in the file after performance. This order prevents missing the link "condition — document — evidence": every promise in the text must have a paper that confirms it.
- Subject matter: write out the contractor's actions as a list and check that each one is included in the agreement without wording such as "as necessary"
- Timeframes: tie them to an event or a date, not to a "reasonable period" — otherwise delay cannot be shown
- Acceptance: check who signs the certificate, in what form objections are raised, and what happens upon refusal to sign
- Amendments: make sure that supplementary agreements and edits are made in writing, not by voice in a messenger
- Authority: verify the signatory against the charter, the appointment decision, and the power of attorney, not against a business card
- Archive: decide in advance where certificates, reports, and correspondence are stored and who is responsible for their safekeeping
Separately, go through the text through the eyes of the person who will have to prove performance: will they be able, using this agreement and the attached documents, to show the scope and timeframes. If the answer is no, amend the draft before signing — after work begins, changing the terms is harder and more expensive.
Contractual work with a counterparty: when a partner breaches the terms
When a partner breaches the terms, the aggrieved party is entitled to demand performance of the obligation, compensation for losses and a penalty. A contractual penalty works if the parties have agreed on it, and for delay in a monetary obligation a penalty is due even without such a condition — it is calculated from the base rate of the National Bank. For this right not to remain on paper, discipline is needed: a written claim with confirmation of delivery and recording of each breach — by acts, photos, correspondence.
A well-structured procedure for working with counterparties rests on the fact that a claim does not simply "intimidate" but triggers deadlines and creates an evidentiary basis for recovering debt under the contract. If the partner ignores the demands, the collected documents and correspondence become the basis for a lawsuit — without them there is nothing with which to defend the position in the proceedings.
- Send the claim in writing and keep confirmation of receipt
- Draw up acts recording short delivery or refusal to perform
- Conduct business correspondence so that deadlines and amounts are clear from it
- Do not delay in applying — limitation periods are limited
- Check whether the contract contains a condition on a penalty for delay
Practical advice: keep a separate folder for each partner — the contract, appendices, claims and responses to them. When the dispute reaches proceedings, you will reconstruct the chronology by dates, not from memory.
Documents in Contract Work: What Supports Your Position
A position in a dispute is supported by documents that record performance, deadlines, and the parties' reactions, not just the text of the agreement itself. Without them, the terms remain asserted but unproven.
See what should remain in the file when contracts are handled properly. Documents confirm the fact of performance, the scope, and the deadlines. Keep acceptance certificates separately: they record delivery and acceptance and the moment when an obligation is deemed fulfilled. Correspondence is no less important: letters, notifications, and claims by email or on paper show that the counterparty knew about the breach and that you responded.
- The contract and all supplementary agreements with signing dates
- Certificates of completed work, rendered services, and acceptance and transfer
- Delivery notes, invoices, and payment documents
- Correspondence and written claims with proof of sending
- A log of remarks, photos, and records of defects
| Fact | What it proves | What supports it |
|---|---|---|
| Conclusion of the contract | Terms and parties | Contract, supplementary agreements, protocols |
| Your performance | You delivered the work, the scope and deadlines | Certificates, delivery notes, photos |
| Breach by the counterparty | Missed deadline, refusal, defects | Claims, letters, log of remarks |
| Notification of the breach | The counterparty knew about the claim | Mail, courier, delivery against signature |
| Amount of losses | Loss due to non-performance | Invoices, calculations, payment documents |
Collect copies and proof of sending immediately, before a dispute arises.
Contract work and bailiff: how to recover after a judgment
Recovery after a court judgment can be pursued through enforcement proceedings: you obtain a writ of execution and submit it to a private or state bailiff. The choice depends on the category of the case and the amount — for certain types of recovery, the law directly directs you to a state bailiff; in other cases, you may apply to a private one. The debtor may still fail to pay, and that is when the bailiff's work turns the judgment into real money.
If recovery under a supply contract has reached this stage, the bailiff is given not only the writ but also information about the debtor's property: bank accounts, real estate, vehicles, shares in companies. The more complete the information you provide, the faster the arrests and withholdings will proceed. The bailiff then takes actions in accordance with the law, while you monitor the deadlines and challenge inaction if it drags on.
- The original writ of execution and the claimant's details.
- Information about the debtor's accounts, property and income.
- Copies of contracts, acts and correspondence on the transaction.
- Information about the debtor's place of work or business, if known.
Practical tip: set up a separate folder for the case even before the court — invoices, statements and correspondence about the supply will be useful at the enforcement stage as well. Without them, the bailiff will have to search for property on their own, and the process will drag on.
Recovery under a service agreement: step-by-step procedure
Recovery under a service agreement begins with documenting the breach: written requests to the contractor, acts, correspondence and payment documents. First, the breach is documented, then a pre-action claim is sent, and only after that do you go to court. Why delay the claim if the counterparty has already gone silent? The answer is simple: every week without a written demand makes proving your case harder.
The procedure is as follows:
- Documenting the breach: keep the correspondence, acts, payment documents and photos of the work result
- Pre-action claim: send a written demand with proof of delivery — a delivery notification or an acknowledgement of receipt
- Collecting evidence: acts, invoices, business correspondence, documents on the quality and scope of services
- Statement of claim: attach the pre-action claim and proof that it was sent
- Enforcement proceedings: after the decision, hand the document to the bailiff
It is best to prepare the pre-action claim together with a calculation of the amount and a reference to the terms of the contract — then it serves both as a pre-trial step and as evidence of your position. At Bonafacto, the cost of each stage is fixed in the contract before work begins, so a complete set of supporting documents is assembled for the claim. Do not delay: the earlier the breach is documented, the easier it is to reconstruct the chronology of events.
Contract work without mistakes: what practice teaches
Practice shows that a breakdown in contract work makes itself felt already at the dispute stage, when it is too late to correct the documents. The first thing worth putting in order is the register of agreements: without it, no one sees payment, renewal and termination deadlines, and papers get scattered across folders and the mailboxes of different employees. Test yourself: can you name, within five minutes, the contracts whose performance deadline falls due this month?
The second group of risks is the loss of primary documents and signing without verifying authority. An act without a signature, an invoice without a receipt mark, a power of attorney with an expired term — all of these undermine your position when a dispute reaches proceedings. The signatory's authority is verified against documents, not a business card: the charter, the appointment decision, the power of attorney. An error of this kind turns a genuine claim into a hopeless one — and it only becomes apparent in court.
What is worth keeping under control:
- Register: a single list of agreements with dates, amounts and responsible persons
- Storage: primary documents collected in one place, not across employees' mailboxes
- Authority: the signatory's charter, appointment decision and power of attorney have been verified
- Confirmation: there is evidence that the other party received the documents
Contract management in Almaty: how to build the process
Contract management in Almaty rests on one principle: every stage has an owner. Assign a contract owner for each business area by order and describe their tasks — counterparty checks, coordinating amendments, monitoring payment and delivery deadlines, and storing supporting documents. The process stops being chaotic when a specific person is behind each step, rather than "everyone chipping in a little."
Next come the working tools: approve standard contract templates and a protocol of disagreements, maintain a single register with statuses, key dates, and owners, and conduct an audit of signed contracts once a quarter. Such an audit identifies overdue payments in advance, terms that are unprofitable to perform, and counterparties showing signs of trouble while the debt can still realistically be recovered. What to introduce first:
- A single contract register with deadlines and payment statuses
- Approved templates and mandatory terms for standard transactions
- A person responsible for counterparty checks and storing originals
- Regular reconciliation of settlements with key partners
Bonafacto lawyers review already signed contracts during the first consultation and show which terms should be rewritten before the next transaction.
Money is lost not in court, but long before it — at the moment when you agree to an unfavorable term or fail to document performance. Contract management should begin before signing and end with the funds actually arriving. Dulat Abenov
Conclusion
Transaction support begins long before signing and ends not with a court decision, but with the actual receipt of funds into the account. Between these points lie verification of terms, recording of agreements, and documents that substantiate your position in a dispute. Skipping any stage means leaving your money in limbo.
What does a well-structured process deliver? Predictability: it is clear who is responsible for each term, what confirms performance, and how to act in case of breach. A contract without annexes and correspondence is weaker than it seems — and performance without control turns even a won case into a lengthy procedure.
Check your transactions against three points: terms, evidence, performance. If even one is lacking, fixing it is cheaper before a dispute than after.